Installation precautions of stainless steel press fit elbow
When the stainless steel press fit elbow is installed, the stainless steel press fit elbow can be directly installed on the pipe according to the connection mode and installed according to the position used. In general, it can be installed in any position of the pipeline, but it needs to be easy to operate the inspection, note that the medium flow direction of stop stainless steel press fit elbow should be below the longitudinal disc upstream, stainless steel press fit elbow can only be installed horizontally. The stainless steel press fit elbow should pay attention to sealing during installation to prevent leakage and affect the normal operation of the pipe. Stainless steel press fit elbow plays an important role and value in the installation and use, and produces good operation in certain environment and medium.
Ball valve of stainless steel press fit elbow, globe valve, gate valve is used when, make full open or full close only, do not allow to do adjust flow rate to use, lest sealing face suffers erosion, quicken wear and tear. Long - term storage of stainless steel press fit elbow should be checked on schedule, often exposed to the processing surface must be kept clean, clean dirt. Store neatly in a ventilated and dry room. No piling or open storage is allowed.