stainless steel press fittings

Key words：

Category：

Press fittings

Tel :+86-317-3777877

E-mail :sara@heb315.com

Related Products

Message

stainless steel press fittings

Details description

Stainless steel press fittings info:

Category	Elbow, bend, tee, reducer, coupling, cap, flange etc.
Specification	DN10~DN100.
Thickness	1.0~2.0mm.
Standard	(DIN)DVGW W534-1995; (JIS)JWWA G116:2001; GB/T 19228.1,GB/T19228.3-2011 etc.
Material	304, 304L,316, 316L etc.
Sealing material standard	GBT 19228.3-2003, EN681-1:1998 etc.
Sealing material	HNBR (Hydrogenated Nitrile Butadiene Rubber), PTFE (Polytetrafluoroethylene), CIIR (Chlorobutyl Rubber), EPDM 9 Ethylene-Propylene-Diene Monomer), FKM (Fluororubber )
Working temperature	-20°C to 130°C.
Max working pressure	1.6MPa (equal to 232 psi).

Advantages:

The stainless steel press fittings have the advantages of reliable and safe connection, convenient and quick construction, suitable for embedded installation, maintenance free, update free, and superior economic performance.

Installation steps of stainless steel press fittings:

1. Cut the pipe	Cut the pipe with the cutter, then use special burr removal device or file to remove the burrs completely in case of puncturing the sealing ring.
2. Draw a line	Draw a line with a scriber at bottom of the pipe to confirm the insert length to avoid pipe dropping.
3. Insert the pipe	Insert the pipe to pipe fitting straightly, do not puncture the rubber ring, and confirm the length within 3mm between bottom and the line you drawn.
4. Compress	Make ringlike concave of jaw alignment ringlike convex of pipe fitting ending with rubber ring, and then make compress.
5. Confirm the size	Confirm the size with a hexagon gauge, to ensure the compression position can insert the hexagon gauge completely, avoid irregular compress operation.